reported by user due to possible cheat (It's impossible. 166 has a maximum multiplier 2.5x. )
Strunkenbold
moderator changed status to 'reported by user due to possible cheat'
Strunkenbold
moderator changed status from 'reported by user due to possible cheat' to 'checked by a moderator' - reason: Score is ok. Missing Picture of CPU-Z in combination with the Motherboard.
It's impossible. 166 has a maximum multiplier 2.5x. Go confirming video. I have 5 166MMX and no can mo 2.5x multiplier. I do not see any problems making the result at 233mmх and show on the photo that I used 166!
@gumanoid Here you go: https://youtu.be/evxXzNIdlMU (will be fully uploaded in about 1:30h) you can clearly see the week 35 chip does 200MHz whith the same settings as the 44 does 166. Just so that you know: if you upload a better result with a 166 i'll also ask for video proof... There are a couple of old threads where you can find clues that not all MMX 166 are locked just google "pentium mmx 166 multiplier" and do some digging there have been several people who managed to get these chips to 3x... Please do some reserach before accusing people of cheating
and what should I see on this video? I did not say that the board does not start with jumper set to the position of the multiplier of 3x. it starts but the multiplier is still 2.5x. You can set 83MHz FSB and 2.5x multiplier and giga will show 200MHz speed.
I would like to see the launching of windows and cpu-z with DMI=0
You can see the difference in multiplier... as you can see FSB is 66MHz for both, I even show the jumper settings, with the old MMX it shows 200MHz (66x3) and with the new one 166 (multi is set to 3 but stays at 2,5)...
Comments
Some MMX have unlocked multiplier up to 3.5x. I believe the PPGA models are unlocked, while CPGA are locked.
@gumanoid Here you go: https://youtu.be/evxXzNIdlMU (will be fully uploaded in about 1:30h) you can clearly see the week 35 chip does 200MHz whith the same settings as the 44 does 166. Just so that you know: if you upload a better result with a 166 i'll also ask for video proof... There are a couple of old threads where you can find clues that not all MMX 166 are locked just google "pentium mmx 166 multiplier" and do some digging there have been several people who managed to get these chips to 3x... Please do some reserach before accusing people of cheating
You can see the difference in multiplier... as you can see FSB is 66MHz for both, I even show the jumper settings, with the old MMX it shows 200MHz (66x3) and with the new one 166 (multi is set to 3 but stays at 2,5)...
3.5 multi works with my 166
Log in or register to comment.