Processor

Model Intel Core i5 520M Arrandale Cooling Air (Stock) Cores 3,884.73 MHz (+61.86%)

Memory

Cooling Air (Stock) Type 4096 MB DDR3 SDRAM Speed @ 665 MHz Timings CL9.0 9-9-24

Videocard

n/a

Motherboard

n/a

Disk

n/a

Power Supply

n/a

Comments

Pain_666 commented on his own score:

14 year and 8 months ago – With this processor I can take about 4.2GHz with core voltage 1.3V, but I'm too lazy - I don't want to disassemble this laptop again) This result captured at 1.08V - it's enough to stable work at 166MHz BCLK, which I use in everyday overclocking (PLL pinmod 133->166).

DR650SE

September 12, 2010 at 2:11:57 PM UTC

Nice job, what notebook are you using?

Pain_666

September 12, 2010 at 6:18:44 PM UTC

Nice job, what notebook are you using?

MSI GX740. First I made PLL pinmod 133->166, and then I used SetFSB (ICS9LPRS113AKLF). Also I made hw mod to increase core voltage. There is is a record about it, it's in russian, but there are some pictures) http://people.overclockers.ru/Pain_666/record9

S_A_V

September 12, 2010 at 7:52:45 PM UTC

MSI GX740. First I made PLL pinmod 133->166, and then I used SetFSB (ICS9LPRS113AKLF). Also I made hw mod to increase core voltage. There is is a record about it, it's in russian, but there are some pictures) http://people.overclockers.ru/Pain_666/record9

Good work

Pain_666

September 12, 2010 at 9:49:19 PM UTC

Good work

DR650SE

September 13, 2010 at 11:32:08 AM UTC

Hmm, My M17x R2 Bios has an option to increase core voltage my 75mV, or 150 mV, I just gotta figure out a way to see if the bios can be edited to allow additional voltage increases. Nice work, takes a steady hand!