Submission Details

riska`s 3DMark03 Score

230993 marks with 2x Radeon HD 5970 27.0 degrees °C under load

@ MHz

02 May 2014

extreme League

Hall of Fame

Rankings

Rankings and Points

World Record Rank

623rd out of 10801

Global 4 Cores GPU Rank

61st out of 633

52.4 Points

AMD 2x Radeon HD 5970 Rank

12th out of 103

27.6 Points

Global 4 Cores GPU Team Power Rank

Not OcTeamDenmark's Best Submission

0.0 Points

AMD 2x Radeon HD 5970 Team Power Rank

9th

9.4 Points

Images

Hardware Details

Processor

Model Intel Core i7 3770K Ivy Bridge Cooling Single Stage Phase Change -60 °C under load

Temperature Load -60.0 °C Idle -64.0 °C Ambient 17.0 °C Cores 6,100 MHz (+74.29%)

Memory

Product G.Skill PI Cooling Air (Stock) Type 4096 MB DDR3 SDRAM Speed @ 2,400 MHz Timings 8-10-8-28-1T

Videocard

Model 2x AMD Radeon HD 5970 (Hemlock) Cooling Water (Custom) 27 °C under load

Temperature Load 27.0 °C Idle 20.0 °C Ambient 17.0 °C Speed 725 MHz / 1,000 MHz (Stock)

Motherboard

Model ASUS Maximus V Extreme Cooling Air (Stock) Chipset Z77

Disk

n/a

Power Supply

n/a

Comments

nachtfalke

May 3, 2014 at 9:10:04 AM UTC

-60 load for a phase change unit is little bit out of range:D

nice cpu:D

riska

May 3, 2014 at 12:12:01 PM UTC

No it is not it is a 16800btu Rotary unit it has a Kprobe at the back of the evap at is says -58 and it have a k probe mounted in the site of the kopper thats on the cpu and it reads the temps i reported so no it is not out of range i have measured it with 3 different temp units and the probe is a Omega probe and there is only 1 degree differens with in the 3 temp units! in Cold rom temp like 6-10 c it is about 3-5c lower

nachtfalke

May 3, 2014 at 1:19:35 PM UTC

not that BIG btu´s count mate..because the limit of refrigerant´s push with one 10-12k btu ....for example R507a have -47.1 boiled points , R404a -46,4 ..most phase change builders push the discharge pressure over safe limit to get that lower temps ..but in 1 year( or less) you have a death compressor.