fast run -40
grande...
Io invece non le strapazzerei Gigio..
cioè trovare delle sdram,da 210 cas2 stabili è pazzesco farei tutti i pi,pifast etc alla svelta... Io rischio tanto le mie oltre i 165 cas2 faticano ad andare
Ma a che voltaggi sei ? Servono almeno 3.8 3.9v x farle rullare le pc133
Nice
Thanks
Vnb-?
3.6v . I think 240mhz on ln2
Vnb 2v
I bought two PC 150 Kingmax - http://img17.allegroimg.pl/photos/oryginal/40/40/75/78/4040757809_2
for ~30euro
Prepare
I bought two PC 150 Kingmax - http://img17.allegroimg.pl/photos/oryginal/40/40/75/78/4040757809_2 for ~30euro Prepare
150 cl2 ?
wow,impressive,very good ram,time to 240 mhz
Mems are: MPJA83S-683 P0B0054.07KX PC-150 and MPJA83S-683 P0B0054.09KX PC-150*
Had two modules of the TinyBGA PC133 version, they didn't do well in my testings. Best luck for the pc150, haven't had the chance to test any.
Thanks, I paid a lot for these mems. Luck will be needed
They are 150 CL3 i think
Someone should try to find some ocz PC180 or some Tonicom PC166 (both have tonicom chips) for the high SDR frequency
i have Tonicom PC166 and PC 150 Kingmax...imo bad ram.
Really?
I never even see one "in the wild", but I always though that micro bga chips were the best for raw frequency.
Thanks -,-
So which ram should I buy?
Tonicom PC166 @ 215 3-3-3 ln2 1m...hunix/hynday imo better
PC 150 Kingmax @ 200 2-2-2 ln2 1m(dunno about 3-3-3, some 205-210)...not best too
I make some posts about ram, when will i have more statistic.
Tonicom PC166 @ 215 3-3-3 ln2 1m...hunix/hynday imo betterPC 150 Kingmax @ 200 2-2-2 ln2 1m(dunno about 3-3-3, some 205-210)...not best too I make some posts about ram, when will i have more statistic.
Great man, thanks for sharing.
I'm looking forward to see your comparsion.
Maybe one of this days I'll try my hyundai with AT-H chips.Never thought these thing would be good
I have PC150 Kingmax. On air 160ish @ 2-2-2
No better than common Micron IMO.
Tonicom pc166 are very bad i have one stock!
Log in or register to comment
Comments
fast run -40
grande...
Io invece non le strapazzerei Gigio..
cioè trovare delle sdram,da 210 cas2 stabili è pazzesco farei tutti i pi,pifast etc alla svelta... Io rischio tanto le mie oltre i 165 cas2 faticano ad andare
Ma a che voltaggi sei ? Servono almeno 3.8 3.9v x farle rullare le pc133
Nice
Thanks
Vnb-?
3.6v . I think 240mhz on ln2
Vnb 2v
I bought two PC 150 Kingmax - http://img17.allegroimg.pl/photos/oryginal/40/40/75/78/4040757809_2
for ~30euro
Prepare
150 cl2 ?
wow,impressive,very good ram,time to 240 mhz
Mems are: MPJA83S-683 P0B0054.07KX PC-150 and MPJA83S-683 P0B0054.09KX PC-150*
Had two modules of the TinyBGA PC133 version, they didn't do well in my testings. Best luck for the pc150, haven't had the chance to test any.
Thanks, I paid a lot for these mems. Luck will be needed
They are 150 CL3 i think
Someone should try to find some ocz PC180 or some Tonicom PC166 (both have tonicom chips) for the high SDR frequency
i have Tonicom PC166 and PC 150 Kingmax...imo bad ram.
Really?
I never even see one "in the wild", but I always though that micro bga chips were the best for raw frequency.
Thanks -,-
So which ram should I buy?
Tonicom PC166 @ 215 3-3-3 ln2 1m...hunix/hynday imo better
PC 150 Kingmax @ 200 2-2-2 ln2 1m(dunno about 3-3-3, some 205-210)...not best too
I make some posts about ram, when will i have more statistic.
Great man, thanks for sharing.
I'm looking forward to see your comparsion.
Maybe one of this days I'll try my hyundai with AT-H chips.Never thought these thing would be good
I have PC150 Kingmax. On air 160ish @ 2-2-2
No better than common Micron IMO.
Tonicom pc166 are very bad i have one stock!
Log in or register to comment