Overclocking, overclocking, and much more! Like overclocking

Submission Details

Rankings and Points

Hardware Details

Processor

Model: Intel Core i7 3770K Ivy Bridge
Cooling: Single Stage Phase Change
Temperature: Load -60 °C Idle -64 °C Ambient 17 °C
Cores: 6,100.00 MHz (74%)

Memory

Product: G.Skill PI
Cooling: Air (Stock)
Type: 4 GB DDR3 SDRAM Speed @ 2,400 MHz
Timings: tCAS: 8.0 tRCD: 10 tRP: 8 tRAS: 28

Videocard

Model: 2x Radeon HD 5970 (Hemlock) (TeraScale 2 (Evergreen))
Cooling: Water (Custom)
Temperature: Load 27 °C Idle 20 °C Ambient 17 °C
Speed: 725.00 MHz / 1,000.00 MHz

Motherboard

Model: ASUS Maximus V Extreme
Cooling: Air (Stock)
Chipset: Z77

Comments

nachtfalke May 3, 2014, 9:10:04 AM GMT

-60 load for a phase change unit is little bit out of range:D

nice cpu:D

riska May 3, 2014, 12:12:01 PM GMT

No it is not it is a 16800btu Rotary unit it has a Kprobe at the back of the evap at is says -58 and it have a k probe mounted in the site of the kopper thats on the cpu and it reads the temps i reported so no it is not out of range i have measured it with 3 different temp units and the probe is a Omega probe and there is only 1 degree differens with in the 3 temp units! in Cold rom temp like 6-10 c it is about 3-5c lower

nachtfalke May 3, 2014, 1:19:35 PM GMT

not that BIG btu´s count mate..because the limit of refrigerant´s push with one 10-12k btu ....for example R507a have -47.1 boiled points , R404a -46,4 ..most phase change builders push the discharge pressure over safe limit to get that lower temps ..but in 1 year( or less) you have a death compressor.