Submission Details
16348 marks
with
Extreme
Submitted
Rankings and Points
- World Record Rank
- Not S_A_V's Best WR Submission
- 1 Core Global Rank
- 1 Core Radeon HD 5770 Rank
-
35th out of 456 34.5 Points
- 1 Core Team Power Rank
- 1 Core Radeon HD 5770 Team Power Rank
Images
Hardware Details
Processor
- Model
- Intel Core i7 2600K Sandy Bridge
- Cooling
- Water (Custom)
- Cores
- 5,300.00 MHz (55%)
Memory
- Product
- G.Skill PerfectStorm
- Cooling
- Air (Custom)
- Type
- 4 GB DDR3 SDRAM Speed @ 2,260 MHz
- Timings
- tCAS: 7.0 tRCD: 8 tRP: 7 tRAS: 20
Videocard
- Model
- Gigabyte Radeon HD 5770 (Juniper) (TeraScale 2 (Evergreen))
- Series
- Super Overclock
- Cooling
- Liquid Nitrogen
- Speed
- 1,300.00 MHz (52%) / 1,400.00 MHz (16%)
Motherboard
- Model
- ASUS Maximus IV Extreme
- Cooling
- Air (Stock)
- Chipset
- P67
Comments
Sehr gut!
Impressive clocks!
S_A_V I wish you tried 'overclocking' the power circuit a little bit -)
pencil mods again?
This time only OCP-mod by pencil
On SOC-series of Gigabyte voltages can be adusted via I2C using RivaTuner v2.25 to control dual-channel current DAC (it marked as "S11" on PCB) connected to feedback-pins of the voltage controllers.
P.S. Congrats, as always excellent work!
No, I mean 2.25, which is still unreleased (and probably never will be).
2.24c supports radeon 4xxx or older cards. Only 2.25 can access to I2C on 5xxx cards.
Any other tools (including latest MSI Afterburner) don't support "S11" current DACs.
Thanks
Seems version 2.25 is a secret for ordinary overclockers. I couldn't find it
Great job here, but it ain't the highest clocks
I'm looking that card seriously and need to learn...
Just ad the ic2 id string in the rivatuner ini file then u have the volt controll you want
Hello can you send me the mods ty
Vgpu-OCP-mod: pencil R699 resistor or solder 100k VR between pin25 (IMAX) of uP6204B and ground
Vgpu-mod: VR between pin20 (FB) of uP6204B and ground
Vmem-mod: VR between pin6 (FB) of uP6101B and ground
Log in or register to comment.