I was prepared for the worst - cb ~ -110*C and reverse scaling with temperature over 5,5GHz which is typical for Wolfdale (2Mb). At least for those which I've benched earlier. But this CPU is a gold one.
1,2v vid
1.22v - 4GHz @ air
1,36v - 4.5GHz @ air
1,56v - 5,25GHz @ ss (wprime)
1,71v - max CPU
Need v-pll less than 1,5v to pass over 5,4 ghz. Best vaule is 1,285V. But with oc-clocks boot only with default v-pll.
Coldbug on -150*C, booting on 5ghz below -132*C. No other issues ...
For PI i need mb with better ddr3 controler. Here 1600MHz ddr3 is maximum benchable frequency. With ddr2 I only have 4:5 FSB:DRAM multipiler (no 3:4) so performance is not very well.
Memory was clocking on 1140mhz 4-4-4-4 and only 2,35v(no memory volt mod) They can do 1200 4-4-4-4 2,3v but not on this board. Wprime was done with stock speed ddr2 and wasn't limited by memory.
The benching was spent on wPrime, Pi score will be updated soon
Comments
No other issues with this set.
For PI i need mb with better ddr3 controler. Here 1600MHz ddr3 is maximum benchable frequency. With ddr2 I only have 4:5 FSB:DRAM multipiler (no 3:4) so performance is not very well.
nice job...
test wPrime 32m and 1024M on 5717 MHZ But SuperPi on 5707 MHZ ????
Memory was clocking on 1140mhz 4-4-4-4 and only 2,35v(no memory volt mod) They can do 1200 4-4-4-4 2,3v but not on this board. Wprime was done with stock speed ddr2 and wasn't limited by memory.
The benching was spent on wPrime, Pi score will be updated soon
Log in or register to comment.