quiekMew's wPrime - 1024m Score 1 min 34 sec 287 ms with Core i7 4930K @ 5239.20

Official HWBOT Partner

Submission Details

quiekMew

wPrime - 1024m Score

1 min 34 sec 287 ms with

Core i7 4930K @ 5239.20 MHz

Extreme Submitted 13 Nov 2018

Hall of Fame

Rankings

Rankings and Points

World Record Rank: 4712th out of 17985
6 Cores Global Rank: 841st out of 2068
6 Cores Core i7 4930K Rank: 31st out of 123 31.8 Points

6 Cores Team Power Rank: Not Team Hardware-Reaktor-Reloaded's Best GL Submission
6 Cores Core i7 4930K Team Power Rank: Not Team Hardware-Reaktor-Reloaded's Best HW Submission

Media

Hardware Details

Processor

Model: Core i7 4930K Ivy Bridge-E
Cooling: Single Stage Phase Change
Temperature: Load -33 °C Idle -60 °C Ambient 22 °C
Cores: 5,239.20 MHz (54%)
Batch: L412C226

Memory

Product: G.Skill PI
Cooling: Air (Stock)
Type: 8 GB G.Skill DDR3 SDRAM Speed @ 2,400 MHz
Timings: tCAS: 8.0 tRCD: 11 tRP: 8 tRAS: 28
Batch: PSC

Videocard

Model: GeForce 210 (DDR3, 64bit, GT216) (GT216) (GeForce 200 series)
Cooling: Air (Stock)
Speed: 475.00 MHz / 790.00 MHz

Motherboard

Model: Rampage IV Black Edition
Cooling: Air (Stock)
Chipset: X79

Disk

Type: SSD
Series: 840 Evo Series (AHCI Controller)

Power Supply

Series: Modu87+
Power: 850 Watt

Comments

quiekMew commented on own score:

Results of me messing around with x79. This 4930K seems to have a decent IMC but outputs a ton of heat. max recorded temp were at -33C evap temp. This is a 20k rotary one from BartX. I had 0 issues with channel dropping, my main issue was with "multi dropping". When increasing the BCLK clock with TurboV the multi would reset to 34 rendering it useless. luckily a reboot fixed the issue. I used the preset LN2 profiles in the RIVBEs bios, they seemed to work the best :) 94% humidity