Official HWBOT Partner

Submission Details

XTU Score
1261 marks with
Core i5 4670K @ 5888.00 MHz
16 Oct 2013
Extreme

Rankings and Points

World Record Rank
57417th out of 164653
4 Cores Global Rank
4 Cores Core i5 4670K  Team Power Rank

Hardware Details

Processor

Model
Intel Core i5 4670K Haswell-DT
Cooling
Liquid Nitrogen
Cores
5,888.00 MHz  (73%) REF 128.00 MHz

Memory

Product
Corsair Dominator Platinum
Cooling
Air (Custom)
Type
DDR3 SDRAM Speed @ 1,408 MHz
Batch
HCH9

Videocard

Model
GeForce 8400 GS DDR2 (G84) (G84) (GeForce 8 series)
Speed
460.00 MHz  /  400.00 MHz

Motherboard

Chipset
Z87

Power Supply

Series
V Series
Power
1000 Watt

Comments

Calathea commented on own score:
cpu = 128 x 46 5888 MHz. Bad efficiency :/
leeghoofd
leeghoofd

But a very nice CPU there man !! Sweet !

Calathea
Calathea

Thanks :) It's good for high load situations, might be good base for 3d-bench system on single stage cooler. I think I have 10+ graphics cards waiting for better times.

BenchBros
BenchBros

Nice CPU...

I guess this is the sweet point between temp and vcore? Which temps you are running at 1,6V?

Calathea
Calathea

Honestly the cpu doesn't scale with much more volt. I think it's a low leakage cpu. Coldbug is at -120, I started at -115, pulled down to -125 and let it warm up to about -118 at the end. Then some heatgun to prevent cold bug.

 

Btw, max pi 1M is 6300 MHz 1.65 Vcore.

BenchBros
BenchBros

-115 is nice...

I have problem with both 4670K I tested that higher voltage results in higher temp.

So voltage up = temp up

voltage down = temp down

So voltage have very big influence to temp!

So I had to find the sweet spot between temp and voltage. Was around -50 to -70°C and around 1,7V.

 

With 1 core temp very very much better (around -100°C with 1,92V)...

Calathea
Calathea

Benchbros, I don't get it. Why only run -50 to -70?

steponz
steponz

Likely because of cb, i have chip with cb at -100..

steponz
steponz

Nice chip :)