48 minutes ago, moi_kot_lybit_moloko said:

qimonda?

Yes

I hope you are cpu limited right now, I'd go with 800mhz fsb cpu and bsel if needed (shouldn't be required though).

1 hour ago, TerraRaptor said:

I hope you are cpu limited right now, I'd go with 800mhz fsb cpu and bsel if needed (shouldn't be required though).

Yes

That result was the final (with that cpu).

Next weekend i'm going to test an 800 fsb cpu (not need for bsel) it will boot at 100 ... and i need to find some suitable hardware for vga and hard disk (i had problems with this Maxtor i used).

1 hour ago, ludek said:

Memset tool works on this motherboard?

Not sure.

I tried version 4.1 but it froze OS ... i will check with older versions.

At least i have a working cpucool , cause max bios boot at the moment is 152

Memset worked fine for my 845 board, though not that much to change (and all settings in memset were the same bios was providing - just wider ranges).

On 10/4/2021 at 9:01 AM, TerraRaptor said:

I hope you are cpu limited right now, I'd go with 800mhz fsb cpu and bsel if needed (shouldn't be required though).

I tested with an 800fsb , 2.4Ghz Northwood.

It booted at 12x100fsb

With 3:4 mem divider , i can bios boot up to 158fsb and raise max 161 within windows (that's 215 mem)

With 1:1 mem divider , i can bios boot up to 166fsb and raise max 211 within windows

https://valid.x86.fr/ne8uei

The board seems to have somekind of watch dog active and whenever it passes certain oc values , it resets to default.

Next weekend i will test different bios versions.